80*30mm Stainless Steel Insulation Tension Clamp for Outdoor Fiber Optic Drop Cable
Drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings. widely used both indoor installation outdoor installation. provided with a serrated shim to increse hole on drop wire. Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachemnts.
Specification:
| Conduit Box Material |
Nylon (UV resistance) |
| Hook Material |
Q235 hot-dip galvanized steel |
| Clamp Type |
1 - 2 pair drop wire clamp |
| Thickness of Drop Wire |
2 to 8 mm |
Application:
1.1 For flat aerial cables
1.2 For Telecom cables 1 copper pair
Installation Steps (General Guide)
2.1 Prepare Cable: Strip the cable sheath if needed, exposing the strength member (aramid yarn/fiberglass rod).
2.2 Position Clamp: Slide the clamp onto the cable at the anchoring point.
2.3 Secure: Tighten bolts/wedges to grip the cable firmly without crushing fibers.
2.4 Mount: Attach the clamp to a pole bracket or wall using screws/straps.
2.5 Final Check: Ensure no excessive tension or bending on the cable.
